When Sealing a Model Is Necessary

Properly preparing a model is half the battle won for making a mold. The original model – be it a toy, candle, figurine or even food item – is carefully cleaned and wiped all over.

The preparation varies depending on the type of mold making material being used. Artists zealously use an appropriate release agent in the right amount (when using any mold making material other than silicone mold rubber) to allow for proper demolding later. This will ensure that the mold does not bond to the model and comes off easily after curing.

However, many novice mold makers may fail to pay attention to the porosity of the model. They may be unaware that the original piece has tiny pores that can soak up some of the mold making material, leading to problems during demolding. Similarly, if the mold is porous, the final cast may fail to cure properly or even stick to the mold and cause distortions later on.

In general, models and molds made of wood, plaster, gypsum, unglazed ceramic, certain clays, stone, cement and concrete are porous.

Therefore, before beginning the mold making process, you should determine whether the model needs to be sealed first. Plastic, wax, plasticine clay, glazed ceramics, metals, fiberglass and polyurethanes are not porous and do not require a sealer. But if the model is permeable, it must be sealed appropriately before applying the release agent or silicone mold rubber. The sealer creates an effective barrier between the model and the mold making material.

Artists often use wax, paint and lacquer as sealers for their models. Clear acrylic sprays and alcohol-based sealers are available in art stores and do not interfere with the surface details of the model. Even sodium silicate is used as a sealer for plaster and concrete.

Water-soluble sealers are completely removable, while semi-permanent ones come off the model to quite an extent. The permanent ones will obviously stay on. In any case, it is better not to expect the model to return to its exact original form.

When applying the sealer, ensure proper coverage on the entire model or mold by using a brush. At times, multiple coats may be required. Solvent-based sealers need to be aired properly before applying the mold making material. In case, a sealer makes the model coarse, sand it down before moving ahead.

Your choice of release agent will depend on both the sealer and mold making/casting materials. Some sealers double up as a release agent too.

Once you have mastered these finer intricacies of mold making and casting, you can gradually move to making more complicated casts and even life casts of the human body. When working with life casts, always display the finished piece on an appropriate base with a personalized brass name plate. The brass name plate replete with your name and title of the artwork will lend the much-desired professional and gallery-like finish to your work!

Topical Remedies: The Right Way to Let You Avoid Surgical Procedures for the Knee

One of the best and most effective ways to overcome knee joint pain is by use of topical medications. Topical treatments are applied externally on the affected area, which ensures that they act locally and have an analgesic effect at the point where one may be suffering from pain.

There are some very basic advantages of going for a topical medication.

– These medications are mainly preferred because they relieve discomfort without affecting the rest of our body.

– These treatments have a minimum chance of side effects, as they are not consumed orally and work by bypassing the digestive track altogether.

– Topical medications are absorbed by the skin, and render a soothing effect to our knees by penetrating through to the bones and muscles.

There are multiple mechanisms by which topical medications work, and effectively so. For healing ailing joints, inducing heat in the applied part of the body (mainly joints), to ensure a higher supply of synovial fluid is an important mechanism by which topical medications work.

What is Synovial fluid?

Synovial fluid and its proper regeneration is a must for proper functioning of joints. It is a viscous fluid which nourishes the articular cartilage.

In our bodies, the bones are cushioned at the ends by cartilage cushions called articular cartilage, a gelatinous substance that covers up the bones. If the cartilage is healthy, it would have a slick surface that prevents friction between bones and enables smooth motion.

As the degree of impact sustained by articular cartilage is high, there are no blood vessels present here. And in absence of blood vessels, the cartilage is nurtured by a fluid present around the joints, which is called the synovial fluid.

The synovial fluid is produced by synovial membranes. It fills up the microcavities and articular cartilage, and prevents friction by acting like a wet sponge.

What causes knee joint pain?

In most medical conditions, knee joint pain is triggered when there is an inadequate amount of synovial fluid in microcavities or articular cartilage. Topically applied medications that are especially meant for joint pain often work by increasing the circulation of blood around the joints. This stimulates synovial membranes to produce synovial fluid, which ensures smooth movement of joints. Using topical medications can thus be very helpful for rendering relief in all types of joint pains, including discomfort arising from everyday fatigue, to conditions like osteoporosis and osteoarthritis. Regular use of topical medications for discomfort in joints not just helps us overcome pain, but also makes the joints stronger over time. These medications are also useful for repairing the damaged parts of joints.

Sandhi Sudha Plus: The miracle of Ayurveda

If you have been diagnosed with any of the medical conditions like sciatica, osteoarthritis, osteoporosis, carpal tunnel syndrome, or have been afflicted by joint pain in any form, Sandhi Sudha Plus is the right remedy to go for.

Sandhi Sudha Plus is a 100% herbal remedy that has proved to be highly effective for healing all strains of joint pain, and has enable people to lead a normal life, all over again.

Sandhi Sudha Plus: Letting you avoid surgery for ailing joints

If you have been recommended to go for an operation or any of the surgical procedures for ailing joints, you must try out Sandhi Sudha Plus first. This would make sure that you are able to recover from the condition and return back to normalcy without having to go for surgery.

Topical Remedies: The Right Way to Let You Avoid Surgical Procedures for the Knee

One of the best and most effective ways to overcome knee joint pain is by use of topical medications. Topical treatments are applied externally on the affected area, which ensures that they act locally and have an analgesic effect at the point where one may be suffering from pain.

There are some very basic advantages of going for a topical medication.

– These medications are mainly preferred because they relieve discomfort without affecting the rest of our body.

– These treatments have a minimum chance of side effects, as they are not consumed orally and work by bypassing the digestive track altogether.

– Topical medications are absorbed by the skin, and render a soothing effect to our knees by penetrating through to the bones and muscles.

There are multiple mechanisms by which topical medications work, and effectively so. For healing ailing joints, inducing heat in the applied part of the body (mainly joints), to ensure a higher supply of synovial fluid is an important mechanism by which topical medications work.

What is Synovial fluid?

Synovial fluid and its proper regeneration is a must for proper functioning of joints. It is a viscous fluid which nourishes the articular cartilage.

In our bodies, the bones are cushioned at the ends by cartilage cushions called articular cartilage, a gelatinous substance that covers up the bones. If the cartilage is healthy, it would have a slick surface that prevents friction between bones and enables smooth motion.

As the degree of impact sustained by articular cartilage is high, there are no blood vessels present here. And in absence of blood vessels, the cartilage is nurtured by a fluid present around the joints, which is called the synovial fluid.

The synovial fluid is produced by synovial membranes. It fills up the microcavities and articular cartilage, and prevents friction by acting like a wet sponge.

What causes knee joint pain?

In most medical conditions, knee joint pain is triggered when there is an inadequate amount of synovial fluid in microcavities or articular cartilage. Topically applied medications that are especially meant for joint pain often work by increasing the circulation of blood around the joints. This stimulates synovial membranes to produce synovial fluid, which ensures smooth movement of joints. Using topical medications can thus be very helpful for rendering relief in all types of joint pains, including discomfort arising from everyday fatigue, to conditions like osteoporosis and osteoarthritis. Regular use of topical medications for discomfort in joints not just helps us overcome pain, but also makes the joints stronger over time. These medications are also useful for repairing the damaged parts of joints.

Sandhi Sudha Plus: The miracle of Ayurveda

If you have been diagnosed with any of the medical conditions like sciatica, osteoarthritis, osteoporosis, carpal tunnel syndrome, or have been afflicted by joint pain in any form, Sandhi Sudha Plus is the right remedy to go for.

Sandhi Sudha Plus is a 100% herbal remedy that has proved to be highly effective for healing all strains of joint pain, and has enable people to lead a normal life, all over again.

Sandhi Sudha Plus: Letting you avoid surgery for ailing joints

If you have been recommended to go for an operation or any of the surgical procedures for ailing joints, you must try out Sandhi Sudha Plus first. This would make sure that you are able to recover from the condition and return back to normalcy without having to go for surgery.

Do You Want More Leads For Your Online Business?

Your lead capture page gathers a prospect’s contact details which then enables you to remain in touch with them. Building a list of prospects is one of the most important aspects of building a successful online business. Here are 10 basic principles that every lead capture page needs.

1. Efficient Autoresponder Software

Your lead capture pages need to work with an autoresponder. Autoresponder software will capture, manage and store your prospects contact details, usually their email. It will send information on autopilot to people when they enter their email address on your lead capture page.

2. Give Away Something Of Value For Free

Provide your prospects something of value for free, like an eBook, report or video series in return for their email address. Keep in mind that if you give away something with very little benefit to your product, they view your business as being the same.
3. Are You Solving A Problem?

Your lead capture page needs to clearly show how your product or service can solve a problem for your target audience. If you can help a prospect, they will want to know more about you.

4. An Attention Grabbing Headline

If the headline on your lead capture page does not catch the attention or interest of the reader, your page will be ignored. Focus on the benefits of your product or service and try various headlines and see what works best.

5. Does Your Text Give More Benefits?

The text needs to demonstrate how valuable your product or service really is. Also check your text for spelling and grammar. Your prospective customers will be turned off by poorly written copy and bad spelling.

6. Professional Design

Your lead capture page is generally the very first contact that a potential customer has with your business. If it looks disorganized or does not load properly it will impact your response rate.

7. Know Your Target Audience

Your hard work to produce a great lead capture page may very well be a waste of time and money if you are not making any sales. Make sure that the traffic you direct to your page is from your target audience.

8. Don’t Be The Same As Everybody Else

A lot of affiliate marketing programs supply pre-made landing page templates for you to use to gather leads. If it is a popular program, a lot of other affiliates may be using the same templates as you. Try to customize your lead capture pages so that they stand out from the crowd.

9. Just The Email Address Will Do

The more information you ask for, the lower the amount of people who will respond. Don’t ask for more than just the name and email address. That’s all you need at this stage.

10. Monitor Your Results

If have several landing page templates online at any one time make sure that you know which ones are working and which ones are not. There are many lead tracking software systems available that will help to monitor what’s working and what’s not.

Do You Want More Leads For Your Online Business?

Your lead capture page gathers a prospect’s contact details which then enables you to remain in touch with them. Building a list of prospects is one of the most important aspects of building a successful online business. Here are 10 basic principles that every lead capture page needs.

1. Efficient Autoresponder Software

Your lead capture pages need to work with an autoresponder. Autoresponder software will capture, manage and store your prospects contact details, usually their email. It will send information on autopilot to people when they enter their email address on your lead capture page.

2. Give Away Something Of Value For Free

Provide your prospects something of value for free, like an eBook, report or video series in return for their email address. Keep in mind that if you give away something with very little benefit to your product, they view your business as being the same.
3. Are You Solving A Problem?

Your lead capture page needs to clearly show how your product or service can solve a problem for your target audience. If you can help a prospect, they will want to know more about you.

4. An Attention Grabbing Headline

If the headline on your lead capture page does not catch the attention or interest of the reader, your page will be ignored. Focus on the benefits of your product or service and try various headlines and see what works best.

5. Does Your Text Give More Benefits?

The text needs to demonstrate how valuable your product or service really is. Also check your text for spelling and grammar. Your prospective customers will be turned off by poorly written copy and bad spelling.

6. Professional Design

Your lead capture page is generally the very first contact that a potential customer has with your business. If it looks disorganized or does not load properly it will impact your response rate.

7. Know Your Target Audience

Your hard work to produce a great lead capture page may very well be a waste of time and money if you are not making any sales. Make sure that the traffic you direct to your page is from your target audience.

8. Don’t Be The Same As Everybody Else

A lot of affiliate marketing programs supply pre-made landing page templates for you to use to gather leads. If it is a popular program, a lot of other affiliates may be using the same templates as you. Try to customize your lead capture pages so that they stand out from the crowd.
9. Just The Email Address Will Do

The more information you ask for, the lower the amount of people who will respond. Don’t ask for more than just the name and email address. That’s all you need at this stage.

10. Monitor Your Results

If have several landing page templates online at any one time make sure that you know which ones are working and which ones are not. There are many lead tracking software systems available that will help to monitor what’s working and what’s not.

How To Become The BEST Leader, You Can Be

Those who are not satisfied with merely holding some position of leadership, but rather seek becoming quality, meaningful, effective leaders, need to review their personal motivations and reasons for deciding to lead! While there are rarely (if ever) any true guarantees, the only way to optimize one’s ability to lead, and thus one’s effectiveness, is to begin the quest with the earnest desire to do so in the highest quality, most effective, BEST way! Abandon the often-followed My way or the highway mindset, and determine what you want to achieve, long-term priorities and goals, a meaningful agenda and timeline, and a consistent focus on quality, etc.

1. Benefits; benevolent; beliefs; bring it: Are you ready, willing and able, to be a benevolent leader, who consistently prioritizes service and serving others, and doing so in the most relevant, sustainable manner? Begin by considering the value of your ideas, especially as they relate to the values of your constituents. Others want to know how your way will benefit them, and thus, deserve their attention, etc. How well will you articulate and stay true to your core beliefs, and are they consistent with the mission and vision of your organization, and its stakeholders? Once you’ve evaluated, don’t procrastinate or wait for others to do it, but rather, deliver on your promises, by consistently bringing the highest level of energy, concept and performance!

2. Empathy; experience; expertise; earn respect: What is your leadership focus and priority? Is it based upon your personal agenda, desires, intents, etc., or focused on the needs, concerns, goals, and priorities of those your serve? Empathetic leaders transform quality experiences into valuable expertise, that enhances their judgment and decision-making abilities. Never expect others to listen or follow your lead, merely because of the position you hold, but rather exceed expectations and consistently earn their respect!

3. Sustainable system; strong; solutions-seeking: Are you merely looking at the issues and concerns that need immediate attention, and might be weaknesses that need to be addressed, or do you do so, in the context of the direction, your organization needs to be headed? Only when your ideas and programs are relevant to needs, concerns, goals, and the vision and mission, will you enhance the sustainability of the organization. Lead with strength, by examining and knowing strongest areas and assets (both yours, and the groups), and use those strong-points, while addressing weaknesses and making improvements in those areas. Don’t merely point fingers, blame and complain, but seek viable, workable, quality solutions!

4. Timely; trustworthy; try hardest: There is no place for procrastination in leading, but that mindset must always be replaced with quality analysis, judgment and taking timely action. When this is done, in a transparent way, with absolute integrity, you will gain the trust, and earn the respect of those you serve, whether they agree or not! Do so with all your effort, and never be satisfied with any effort less than your fullest!

If you decide leading is for you, be the BEST leader, you can possibly be! These four areas are not the only necessities, but are a significant starting point!